CB Radios | 88-Din-Ventosa-12/24V Station

Description

M88 is a versatile CB radio, suitable for any surface and DIN compartment, with 12/24 V power supply and equipped with protection against antenna circuit mismatch.
With all the accessories included in the package, you can hang it on
the windscreen or place it on the dashboard.
M88 turns on automatically and with the Up/Down/Priority channel keys directly on the microphone, you change channels in the blink of an eye.
M88 is multi-band, both FM/AM, therefore suitable to communicate also beyond national borders, adapting to European frequencies.
The aluminium chassis makes the device strong and durable and houses a large TFT colour display with visible messages.
What about the functions Lots and lots of them: PA, 4-channel storage, Dual Watch (to keep 2 channels always under control), Roger Beep (a beep for closing the communication), multi-level digital Squelch and Noise Blanker and HIC, the background noise removal filters.
In the export version, Midland 88 has the following features:
– Power8W AM -15 W FM
– 400 CB channels
– Amateur band: 340 channels (28.000 – 29.695MHz)
– VFO mode (24.715 / 30.105 Mhz)
– CTCSS – DCS tones activation
Specifications:
– Weight: 677g
– Digital Squelch: Yes
– Accessory socket type: 6 Pin
– Quick channels selection: Yes
– Audio output power: ≥ 3W (8 Ohm)
– PA – Public Address: Yes
– Frequency range: 26.565-27.99125 MHz FM (RX/TX) 26.965-27.405 MHz AM (RX/TX)
– Output power: 4W
– Dimension HxWxD: 188x77x57mm
– Emergency channel: Emergency channels 9/19
– Export version: Only for extra EU market
– Key lock: Yes
– Scan: Yes
– Operative band: AM/FM Multiband
– Noise Blanker: Yes
– Power supply: 12/24V
– Modulation: A3E (AM), F3E (FM)
– Squelch: Automatic digital squelch adjustable in different levels
– S-Meter: Yes
– RF Gain: Yes
– Display: TFT Multicolour
– Channels: see frequency band chart on manual instruction
– External speaker socket: 3.5mm mono plug – 8 Ω.
What´s in the box:
– M88 transceiver with power cord
– Microphone
– Mounting bracket
– Fixing screws for the bracket
– Screws to fix the radio to the bracket
– Protection fuse
– Mike holder
– Suction cup for glass mounting
– DIN-bracket with mounting/dismanting kit.